It is already known to many front panels for exterior decoration of private homes and cottages . Not all of them find a perfect finish for facades and exterior parts of the various structures, and all because knowledge of them is quite fragmented, not ordered, and in some cases critically incomplete. Therefore, to compensate for the lack of information, we suggest you to plunge into the reading of the material.
- product range
- Just decor
By installing facades resorted to the final stage of decorative finishing facilities. In some ways it's even better in terms of technology, as this process may be delayed for an indefinite period, as well as to use it even during active operation of buildings. But not only the convenience of these materials in the decoration is their advantage. Their main advantage in versatility, which means additional buildings protection primarily against moisture, cold and wind. Some embodiments according to the material used can provide further noise insulation. But first things first, and proceed to classification.
Construction markets, hypermarkets and DIY stores offer a very impressive assortment of the buyer. To buy them, you will need quite a bit of time, but their price many can be frustrating, because it is very high for large volume purchases.
This is especially true of panels that are based on natural materials, such as wood. But artificial materials can be selected and cheaper options. However, the selection criteria do not end there. Models from different manufacturers differ in the complexity of the design, from what can be simplified or vice versa complicated installation. Therefore it is necessary to consider in more detail and range of variants and the basic classification, so as not to make a mistake in choosing.
Like many other products of the country, which is the first to meet the sun, the Japanese front panels for exterior home decoration are among the best. They have a number of positive qualities, allowing to highlight the front panel. The main advantage is that they are eco-friendly and non-flammable. Their sizes are standardized, which simplifies the assembly operations to a minimum, which exclude fit. The length of 3 meters and the width - 3 or 5 cm, depending on the species. The thickness also depends on the model and is in the range 14-21 mm. Attaching the same type for all models, which allows them to be replaced without any problems, even if your model is not on sale. The peculiarity of these species is that they provide sound insulation and sound insulation at an acceptable level, different fire safety, durability and resistance to other environmental factors, including, to burn in the sun and excessive humidity. Many also highlighted their light weight, which reduces the load on the foundation, ease of use.
However, these panels are also ideal can not be named. There are features of the technology that is required to take into account. One of them - the need for installation on the facade of the crates.
This material is quite popular, and many people know that he is. For those who are not familiar, we note with it: it is the surface of a wooden texture. It will give the building orderly and correct design errors in its construction, or make them more visible, if not installed. It is worth noting that the siding under the stone is suitable for facilities of all sizes: for the cottages, and for large-scale plants or warehouses. Its special advantage in a variety of colors and shapes, which are directly dependent on the material used. Plating / installation process takes a minimum of time. If we take the basis of the area of a small house, you can do it with your hands in just a day, provided quality training.
What good front plastic panels for exterior finishing of the house, it's the fact that they are perhaps the most common form presented in the building materials market. He has a lot of advantages. The most important of them - protection from atmospheric phenomena - wind and precipitation. they also do not fade under prolonged exposure to ultraviolet radiation and coping well with seasonal temperature changes. An invaluable advantage for the born designer - broad color palette from which you can play indefinitely, creating incredible combinations. In addition, they come in various sizes and structures, which may include multiple layers.
But the disadvantages he is still there. They are in a technology that involves the use of additional waterproofing. As she used wax paper or glassine.
This material is known as cladding lining. It differs in that it is equally well used and for interior and exterior, which makes it ideal for finishing unheated spaces. It is resistant to frost and heat, not deformed. Its only drawback - poor resistance to sunlight. This applies to the cheaper options without additional lacquer coating, which some manufacturers do not use.
Not so long ago became popular and metal front panels for exterior decoration of the house. They are based on aluminum or galvanized steel, which makes perforated, textured or smooth, given the desired result. Metal always has a protective coating, so that such panels durable, waterproof, and depending on the coating quality and another fireproof.
The main disadvantage of galvanized panels - a significant load on the foundation, so it is better to replace aluminum, but the cost in this case is high. But in return it will receive the added benefit of stability to repeated frost. Also, for many it will be a challenge to mount such panels, as these designs require specific supplies and tools.
This option can be considered a perfect skin is when you need to not only protect the building from rain, but also on low temperatures during the autumn-winter period. Their design is more complex and higher cost, because one of the layers - a layer of bulk insulation. The outer and inner part of such skin would be framed. In addition, further can comprise a vapor barrier layer.
In addition to the insulation panels give such tangible soundproofing and even noise reduction. Fasten them simply, without special preparation of the walls, which is also an unquestionable advantage. Most of the options on the market, has a long service life, environmental and fire safety.
At the same time there are a number of significant disadvantages which include damage to the lung in step installation and before it, as well as problems with thermal insulation in the harsh environment of extreme north.
In contrast to the sandwich panels ECOPAN itself is an insulator. It is based on polystyrene is used - a chemical substance with many advantages, including low cost. Another plus - lightweight with big volume. It plays an important role when it is important to keep the load on the ground around the building and the wall. Fire safety is also at a high level, since the material keeps the fire for an hour. The only drawback - the need for additional decoration panels.
Another interesting option - a composite material whose main component is the clinker tiles. It acts not only as a decoration, but the protective material as well to cope with seasonal temperature changes. Such protection is further triggered by the appearance of mold , but its cost is much higher than that of the same plastic elements.
fiber cement panels
One of the most modern materials are fiber cement façade panels for exterior decoration of the house. They are created using a special technology, which involves the use of cement and cellulose fibers. Composite materials obtained from, is formed as a siding or plates. They are often textured to create special effects that simulate a particular surface. Also on the panel producing dyed polymer to obtain the desired result.
On the hand the client receives the light, flame-resistant and durable, attractive and easy to install. Complemented by all this good sound insulation and environmental safety.
Front panels for exterior home decoration: a decor
The options are many decorative panels, and choose the best view of them is easy. It is only necessary to decide in what kind of texture will simulate outdoor decor. This can be:
- timber ;
- masonry ;
- Stone (savage).
Banding, stylized brick, allow you to see the construction of an entirely different. With its help, you can turn even the old wooden house in a brick building. But before you plan the purchase of building materials, it is necessary to assess their financial capabilities, t. To. The cost of such a front facing high. Additional costs must be planned on a payment masters. Nevertheless, it will be much cheaper and faster than the whole house obkladyvat brick. In addition, such a decorative finish of the facade can be done in any weather conditions, and it is applicable for both homes and for garages and fences .
When using such panels can also save considerably on a heater, because there is a variant construction of modules already includes insulation - polystyrene.
If the brick does not fit the overall style of the space, you can select another option decorative finishing - under a rock. As in the previous version, such panels have a significant drawback. For their installation requires special equipment and adhesives, is heated in the process.
Tip! Another feature of this coating is in the price. The plausible simulated texture, the more expensive material. Therefore, we can take a low-cost option, and then modify it by using some tricks - tinting and toning coating.
To create a base of imitation does not use simple facade panels, and special. They are made of other, more resistant to moisture materials, and they have a slightly different mounting method, which involves an additional thermal insulation and waterproofing. That is why it is placed only at zero temperature.
Often such a decoration embodiment further protect against mechanical impact and corrosion when it is created that equalizes the lifetime with other facing materials used for the remaining parts of the walls.
Finally it is worth noting a few manufacturers who have already gained a reputation among frequent customers - the companies contractors performing cladding and insulation of buildings.
- The company produces panels Khol layer based on polymer materials, so their products are different weight designs, and relatively low cost.
- The German company Docke-R produces a product of a higher class, so their cost is much higher.
- FineBer company specializes in several other products. They are based not use plastic and PVC, and apply them more often for the cap, which requires greater protection. However, nobody forbids to use them on all wall surfaces. But whether or not, there is a cost much higher than the average? This company has competitors, producing similar products, - Alfa-profile. Its products has positioned it as being suitable for all weather conditions.
- Nailite International - last, but only on the list, the manufacturer. He is one of the first who began to produce similar facade decoration. Therefore, if you are traditionalist, you can easily choose exactly it.